Annealing And Pickling For Stainless Steel
The heat treatment has to be specific in annealing and pickling line to find the best compromise between strength and ductility without neglecting the surface finish. Annealing and pickling lines (APL's) are used for the treatment of hot rolled (HR) and cold rolled (CR) stainless steel strips.

HR Austenitic & CR strip is annealed and pickled continuously in an APL and HR ferric strip is only pickled. Lines for HR & CR, as well as dedicated APL's process the majority of the stainless steel production.

Slitting Lines
Slitting Lines have been successfully put into operation in well-known production plants & service centres. These lines have the capability to meet client's demand for minimum burr, no damage to the surface, high production capacity etc., to the fullest. The high automation level of the lines reduces the need for operator attendance and ensures economy of operation.

Characteristic Features:

• High automation level to achieve high economic efficiency
• Minimum burr on strip edges due to high running accuracy of knife arbors
• No manual interferences required as the edge scrap baller is pit mounted

Additional Features :

• Quick Slitter Head Change with Standby Slitter Head.
• Dual speed lines to cover wider range of thickness.

H.R. Slitter :
Specification :

Additional Features :
Quick Slitter Head Change with Standby Slitter Head.

C.R. Slitter :

Type of Line	Single / Double Loop.
Material	CR FH / CRCA / GALVANIZED / COLOUR COATED.
Strip Thickness	3.0 MM.
Strip Width	1650 MM.
Coil O.D.	2000 MM.
Coil Wt.	30 T.
Line Speed	250 MPM.

Additional Features :
Quick Slitter Head Change with Standby Slitter Head.